Wiring Diagram
for
1 Plug per Cylinder using Single Fire Coils
with
Electronic Ignitions using 3 Ohm Coils

For use with Spyke Super Comp Single Fire Ignitions
Do Not wire using points or Ignition systems without saturation or dwell control.
Over heating and Damage to Coil and/or Ignition will occur!!!
 

Note: SF coils can not be wired for 2 plug per cylinder Single Fire.
(see DF 2 plug per cylinder single fire wiring)
Use only Carbon Core resistor Spark Plug wire!!
Solid or Spiral wound wires will damage the ignition module or coil.

Initial settings for spark plug gaps are:
Stock Plug 0.028-0.032"